JullDent 148 ACM Drill

ACM Drill

Autochip Maker is an instrument to collect autograft bone from mandibular molars or incisor for GBR in defected area.

A good ACM drill helps to collect maximum autogenous bone volume in minimum time ie 1cc within 10 seconds!

Features:

Diameter: 3, 4, 5, 6mm

Bone collection capacity: 0.5cc bone

Special non-slip tip design.

Excellent cutting force

No vibration on any surface.

A re-usable stopper also provided with the drill.

Procedure

1. Mount stopper to ACM and connect dental implant motor.
2. Locate the drill on the surface of operation area by pressing it slightly with saline irrigation.

Recommended drilling speed is 300-500rpm and maximum torque over 50Ncm.

The stopper does not go deeper than 4mm. Maximum 4mm depth autograft bone can be collected in each area.

In order to collect high quality autograft bone, drill until 3-4mm depth and move to different area to collect the same quality bone chip.

Drill to left and right for effective cutting and cooling.

3. When autograft bone is fully filled in the space, take out the bone chips from ACM to the medical bowl after removing the stopper.
4. Repeat procedure 1-3 until enough autograft bone has been taken.
5. GBR with the collected autograft bone in the defected area.

Price: Rs. 3360 per drill

Drill box with set of 4 ACM Drills ; Rs. 11,200/-

Size: 148 A : 3mm drill

148 B: 4mm drill

148 C: 5mm drill

148 D : 6mm drill

148E : Set of 4 ACM Drills with Drill box  : Rs. 11,200/-