Julldent 029 Multiple Implant Guide

Shopping cart

Home
Checkout
Shop
0Wishlist

All Departments

9082242914

0

All Categories

Recently Viewed

SINUS LIFT ELEVATORS JULL-DENT 008 Sinus Elevators: • Used to aide in the lifting up of the sinus cavity for implant site preparation. • Elevators feature a more round, smooth tip for lifting the sinus with minimal puncture risk. Sinus Curettes: Sinus Curettes feature a cutting edge for scraping purposes, but can also be used to lift sinus in preparation for implant procedures. Tip Material: TITANIUM GRADE 5 Handle Material: Silicon Handle. A) Sinus Lift Elevator No.1 (Short Tip 9mm) JULL-DENT 008A To separate and elevate the sinus membrane. Triple angulated tip permits easy access to any where at any directions. Short or long tip can be used depend on accessibility. B) Sinus Lift Elevator No. 2 (Long Tip 15mm) JULL-DENT 008B To separate and elevate the sinus membrane. Triple angulated tip permits easy access to any where at any directions. Short or long tip can be used depend on accessibility. C) Sinus Lift Elevator No. 3 JULL-DENT 008C The Obtuse Angle will facilitate Easy Access to the Mesial, Distal, Superior & Inferior Aspects. D) Graft Material Spoon + Tapered Graft Packer JULL-DENT 008D Graft Material Spoon (8mm x 15mm): To carry the bone graft material. Tapered Graft Packer 3.0mm / 4.0mm: It is used in Maxillary Sinus Operation to complete the hole. Lift up the initial maxillary sinus membrane and pack the Bone. E) Freer Elevator Curved 3mm/5mm JULL-DENT 008E To separate and elevate the sinus membrane. To pack the bone graft material into the sinus cavity. F) Membrane Separator + Pikos Graft Packer Angled 4.0mm JULL-DENT 008F Membrane Separator/Lifter 5mm: To separate sinus membrane at initial stage. Pikos Graft Packer Angled 4.0mm: Concave Tips. Tip Diameter: 4mm. Excellent in Sinus Condensation. View All

Download Catalogue*

All Categories

Recently Viewed

SINUS LIFT ELEVATORS JULL-DENT 008 Sinus Elevators: • Used to aide in the lifting up of the sinus cavity for implant site preparation. • Elevators feature a more round, smooth tip for lifting the sinus with minimal puncture risk. Sinus Curettes: Sinus Curettes feature a cutting edge for scraping purposes, but can also be used to lift sinus in preparation for implant procedures. Tip Material: TITANIUM GRADE 5 Handle Material: Silicon Handle. A) Sinus Lift Elevator No.1 (Short Tip 9mm) JULL-DENT 008A To separate and elevate the sinus membrane. Triple angulated tip permits easy access to any where at any directions. Short or long tip can be used depend on accessibility. B) Sinus Lift Elevator No. 2 (Long Tip 15mm) JULL-DENT 008B To separate and elevate the sinus membrane. Triple angulated tip permits easy access to any where at any directions. Short or long tip can be used depend on accessibility. C) Sinus Lift Elevator No. 3 JULL-DENT 008C The Obtuse Angle will facilitate Easy Access to the Mesial, Distal, Superior & Inferior Aspects. D) Graft Material Spoon + Tapered Graft Packer JULL-DENT 008D Graft Material Spoon (8mm x 15mm): To carry the bone graft material. Tapered Graft Packer 3.0mm / 4.0mm: It is used in Maxillary Sinus Operation to complete the hole. Lift up the initial maxillary sinus membrane and pack the Bone. E) Freer Elevator Curved 3mm/5mm JULL-DENT 008E To separate and elevate the sinus membrane. To pack the bone graft material into the sinus cavity. F) Membrane Separator + Pikos Graft Packer Angled 4.0mm JULL-DENT 008F Membrane Separator/Lifter 5mm: To separate sinus membrane at initial stage. Pikos Graft Packer Angled 4.0mm: Concave Tips. Tip Diameter: 4mm. Excellent in Sinus Condensation. View All

Download Catalogue *

  1. Home
  2. Implant Guides
Prev
Julldent 030 Implant Spacer Tool₹1,200.00
Next
Julldent 027 Mesio Distal Guidance System (MD Guide)₹3,600.00
Mesio Distal Guidance System (MD Guide) Jull-Dent 027 The Mesio-Distal Guidance System just allows you to drill your pilot hole more accurately in terms of Mesio-Distal Spacing and Parallelism. We have given analogs (Non Drilling Guide) in 7 sizes of cylindrical diameters viz. 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm. Also we have given silicon stoppers of same cylindrical sizes. These silicon stoppers fit onto your any implant system pilot drill upto drill diameter of 3.2mm. Hence it can be adjusted tightly till any depth of the drill size. These silicon are autoclavable. The analogs (Non Drilling Guide) will also allow you to simulate the presence of the future prosthetic teeth when placing several implants. Mesio-Distal Guidance System eliminates the need for making a surgical guide. For Single Implant Case 1) Measure the Mesio Distal distance between the adjacent teeth by putting Guide Pins. 2) Once the distance is finalised; put the same size of silicon stopper over the initial pilot 2mm Implant drill to desired depth. 3) The Drilling will be exactly at the center of the two adjacent tooth (ie. You can achieve the Mesio Distal Center drilling). For Multiple Implant Cases 1) Select the guide diameter that matches the mesio-distal dimention of the missing tooth. Put silicon cylindrical stopper of same size and place it against the adjacent tooth to create the first pilot hole. 2) Place the Guide at the pilot hole site of same diameter. 3) Select the size of the guide diameter that matches the mesio-distal dimension of the second missing tooth. Put silicon cylindrical stopper of same size and place it against the previously placed cylindrical analog guide to create the second Pilot hole. 4) Repeat the steps from Step number 3 as necessary in the case of multiple implants. Feature: Depth and distance interval can be solved with only one drilling. Simple and easy drilling. Surgery time can be shortened and possibility of frequent mistakes can be prevented in advance Ideal Stopper Design & Crown Guide Design. Strength. Both the Crown size and implant depth are simultaneously guided with only one drilling during the initial drilling. The mistake of the widened or narrowed interval between implants can be prevented when two or more implants are placed. The Crown Size and prosthetic appliance can be designed at the same time of implant placing. Manufactured from high quality surgical materials, with high quality performance. All drills and tools undergo an anti-rust process.
Julldent 029 Multiple Implant Guide
Julldent 029 Multiple Implant Guide - Image 2
Julldent 029 Multiple Implant Guide - Image 3
Julldent 029 Multiple Implant Guide - Image 4
Julldent 029 Multiple Implant Guide - Image 5
Julldent 029 Multiple Implant Guide - Image 6

Julldent 029 Multiple Implant Guide

0 customer reviews Sold: 51

₹1,800.00

Kindly login to know the price..Click here

Multiple Implant Guide

57 in stock

₹1,800.00

57 in stock

Add to cart
Buy Now
SKU: Julldent 029 Categories: Tag:

Multiple Implant Guide
Jull-Dent 029

For Multiple Implant case, We kep the drill/parallel pin inserted in the First drilling and make the adjacent Drilling at 7mm and 9mm away from each other. Most common distance between 2 implants placements. This tool maintains the angle of the drilling as well. The drilling will be exactly at the Mesio-Distal distance required.

Material: Non Magnetic Stainless Steel 316 Grade

 

Weight 0.040 kg
Dimensions 10 × 5 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Top
Top